Space-Saving Coat Storage
>> Tuesday, October 30, 2012
Anyway, back to the genius part. Our builder wasn't a custom builder. As in, we had a few choices but not many. We picked our flooring, countertops, cabinet style, and siding color from a limited selection. Most things were upgrades that we would have had to pay extra for, so for the most part we stuck with the basics. We didn't even have a choice in paint....everything was painted flat white. My mom and I painted almost the entire house in the 2 days before we moved in. Fun times!
One of the great things about our house is that it is a perfect DIY house! Everything works and there is nothing we had to do, but there are lots of things we (or at least I) want to do. One such project was to add storage near the main entrance. Our front entrance and garage entrance are close to each other, and there is just a small 2x2 coat closet in between. Not enough coat storage for a family of 5! So, I started googling (this was before I knew about Pinterest.com!) and found a couple inspiration photos that I thought would be good for our situation.
Here's the project:
Basically, when you open the door from the garage, there is a blank wall that is just not doing anything. Here it is in the photo below. The door you see in the background on the right is our 1/2 bath, behind me is our front door, and to the left is the coat closet.
Anyway, I decided the best solution would be to add a coat rack behind the door. My parents have a 103 year old farm house, and it has coat storage flat along the wall, so I kind of use that as my inspiration as well. I would have loved to add a "locker" or a bench or something, but obviously there is no room for something like that. So, off to the hardware store I went. I basically just purchased some 1x6 boards. I picked the pre-primed composite ones, because I'm pretty new with woodworking and didn't feel competent to work with raw wood. If I had to do it over again, I would choose the raw pine wood because it's a little nicer material than the composite ones I chose. The only extra step is to sand and prime the wood before you paint it, but that doesn't take very long to do.
So, basically once I purchased my wood, I came home and cut it to the length of my wall, painted it, put construction adhesive on it and then screwed it into the wall. I wanted 5 hooks on each board, so I measured them out equally and put the screws in so they would line up behind the hooks. No patching... genius!
Here's how it looked with the screws, before adding the hooks.
And here is the finished product:
It's the perfect place to hang the backpacks as well as some of the jackets that we use the most. It also turned out to be a good place to stash a couple of baseball caps.
Here's a close-up of the hooks I used. I found them at Lowes. But unfortunately there was a supplier issue and I had to go to 3 different Lowes to get all 10 of my hooks :(. But I really wanted hooks with two places to hang things on. Plus I didn't want something that was tiny or huge since the door would hit them if they stuck out too far. These were the perfect size.
So, those 10 hooks added a lot more storage room in a previously unused wall space. For a little extra shoe storage, I hung a closet organizer on the back of our closet door...it's the perfect size for all of those toddler and little boy shoes. Plus our adult sandals fit in there as well.
Hope this post gives you a little inspiration for a totally easy DIY project!